Vulnerabilities

A firmware bug which may lead to misinterpretation of data in the AMC2-4WCF and AMC2-2WCF allowing an adversary to grant access to the last authorized user.

Command Injection in the diagnostics interface of the Bosch Network Synchronizer allows unauthorized users full access to the device.

Network port 8899 open in WiFi firmware of BCC101/BCC102/BCC50 products, that allows an attacker to connect to the device via same WiFi network.

An information disclosure vulnerability was discovered in Bosch IP camera devices allowing an unauthenticated attacker to retrieve information (like capabilities) about the device itself and network settings of the device, disclosing possibly internal network settings if the device is connected to the internet.

An improper handling of a malformed API answer packets to API clients in Bosch BT software products can allow an unauthenticated attacker to cause a Denial of Service (DoS) situation. To exploit this vulnerability an attacker has to replace an existing API server e.g. through Man-in-the-Middle attacks.

An improper handling of a malformed API request to an API server in Bosch BT software products can allow an unauthenticated attacker to cause a Denial of Service (DoS) situation.

A command injection vulnerability exists in Bosch IP cameras that allows an authenticated user with administrative rights to run arbitrary commands on the OS of the camera.

Improper Information in Cybersecurity Guidebook in Bosch Building Integration System (BIS) 5.0 may lead to wrong configuration which allows local users to access data via network

Improper Authorization in SSH server in Bosch VMS 11.0, 11.1.0, and 11.1.1 allows a remote authenticated user to access resources within the trusted internal network via a port forwarding request.

Due to an error in the software interface to the secure element chip on Bosch IP cameras of family CPP13 and CPP14, the chip can be permanently damaged when enabling the Stream security option (signing of the video stream) with option MD5, SHA-1 or SHA-256.

An Improper Access Control vulnerability allows an attacker to access the control panel of the B420 without requiring any sort of authorization or authentication due to the IP based authorization. If an authorized user has accessed a publicly available B420 product using valid credentials, an insider attacker can gain access to the same panel without requiring any sort of authorization. The B420 module was already obsolete at the time this vulnerability was found (The End of Life announcement was made in 2013).

Incomplete filtering of JavaScript code in different configuration fields of the web based interface of the VIDEOJET multi 4000 allows an attacker with administrative credentials to store JavaScript code which will be executed for all administrators accessing the same configuration option.

An error in the URL handler of the VIDEOJET multi 4000 may lead to a reflected cross site scripting (XSS) in the web-based interface. An attacker with knowledge of the encoder address can send a crafted link to a user, which will execute JavaScript code in the context of the user.

Information Disclosure in Operator Client application in BVMS 10.1.1, 11.0 and 11.1.0 and VIDEOJET Decoder VJD-7513 versions 10.23 and 10.30 allows man-in-the-middle attacker to compromise confidential video stream. This is only applicable for UDP encryption when target system contains cameras with platform CPP13 or CPP14 and firmware version 8.x.

File path manipulation vulnerability in BF-OS version 3.00 up to and including 3.83 allows an attacker to modify the file path to access different resources, which may contain sensitive information.

BF-OS version 3.x up to and including 3.83 do not enforce strong passwords which may allow a remote attacker to brute-force the device password.

The user access rights validation in the web server of the Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 was insufficient. This would allow a non-administrator user to obtain administrator user access rights.

The Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 and earlier was found to be vulnerable to command injection through its diagnostics web interface. This allows execution of shell commands.

The Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 runs its web server with root privilege. In combination with CVE-2022-23534 this could give an attacker root access to the switch.

A specially crafted TCP/IP packet may cause the camera recovery image web interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

A specially crafted TCP/IP packet may cause a camera recovery image telnet interface to crash. It may also cause a buffer overflow which could enable remote code execution. The recovery image can only be booted with administrative rights or with physical access to the camera and allows the upload of a new firmware in case of a damaged firmware.

The Bosch software tools AccessIPConfig.exe and AmcIpConfig.exe are used to configure certains settings in AMC2 devices. The tool allows putting a password protection on configured devices to restrict access to the configuration of an AMC2. An attacker can circumvent this protection and make unauthorized changes to configuration data on the device. An attacker can exploit this vulnerability to manipulate the device\'s configuration or make it unresponsive in the local network. The attacker needs to have access to the local network, typically even the same subnet.

Communication to the AMC2 uses a state-of-the-art cryptographic algorithm for symmetric encryption called Blowfish. An attacker could retrieve the key from the firmware to decrypt network traffic between the AMC2 and the host system. Thus, an attacker can exploit this vulnerability to decrypt and modify network traffic, decrypt and further investigate the device\'s firmware file, and change the device configuration. The attacker needs to have access to the local network, typically even the same subnet.

A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).

By executing a special command, an user with administrative rights can get access to extended debug functionality on the VRM allowing an impact on integrity or availability of the installed software. This issue also affects installations of the DIVAR IP and BVMS with VRM installed.

An error in a page handler of the VRM may lead to a reflected cross site scripting (XSS) in the web-based interface. To exploit this vulnerability an attack must be able to modify the HTTP header that is sent. This issue also affects installations of the DIVAR IP and BVMS with VRM installed.

An unauthenticated attacker is able to send a special HTTP request, that causes a service to crash. In case of a standalone VRM or BVMS with VRM installation this crash also opens the possibility to send further unauthenticated commands to the service. On some products the interface is only local accessible lowering the CVSS base score. For a list of modified CVSS scores, please see the official Bosch Advisory Appendix chapter Modified CVSS Scores for CVE-2021-23859

A vulnerability in the web-based interface allows an unauthenticated remote attacker to trigger actions on an affected system on behalf of another user (CSRF - Cross Site Request Forgery). This requires the victim to be tricked into clicking a malicious link or opening a malicious website while being logged in into the camera.

When using http protocol, the user password is transmitted as a clear text parameter for which it is possible to be obtained by an attacker through a MITM attack. This will be fixed starting from Firmware version 3.11.5, which will be released on the 30th of June, 2021.

This vulnerability could allow an attacker to hijack a session while a user is logged in the configuration web page. This vulnerability was discovered by a security researcher in B426 and found during internal product tests in B426-CN/B429-CN, and B426-M and has been fixed already starting from version 3.08 on, which was released on June 2019.

An error in the handling of a page parameter in Bosch IP cameras may lead to a reflected cross site scripting (XSS) in the web-based interface. This issue only affects versions 7.7x and 7.6x. All other versions are not affected.

A Missing Authentication in Critical Function in Bosch IP cameras allows an unauthenticated remote attacker to extract sensitive information or change settings of the camera by sending crafted requests to the device. Only devices of the CPP6, CPP7 and CPP7.3 family with firmware 7.70, 7.72, and 7.80 prior to B128 are affected by this vulnerability. Versions 7.62 or lower and INTEOX cameras are not affected.

In Bosch IP cameras, improper validation of the HTTP header allows an attacker to inject arbitrary HTTP headers through crafted URLs.

An error in the URL handler Bosch IP cameras may lead to a reflected cross site scripting (XSS) in the web-based interface. An attacker with knowledge of the camera address can send a crafted link to a user, which will execute javascript code in the context of the user.

An authenticated attacker with administrator rights Bosch IP cameras can call an URL with an invalid parameter that causes the camera to become unresponsive for a few seconds and cause a Denial of Service (DoS).

Calling an executable through an Uncontrolled Search Path Element in the Bosch Video Streaming Gateway installer up to and including version 6.45.10 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious exe in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Monitor Wall installer up to and including version 10.00.0164 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Configuration Manager installer up to and including version 7.21.0078 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Client installer up to and including version 1.7.6.079 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in the Bosch Video Recording Manager installer up to and including version 3.82.0055 for 3.82, up to and including version 3.81.0064 for 3.81 and 3.71 and older potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same directory where the installer is started from.

Loading a DLL through an Uncontrolled Search Path Element in Bosch BVMS and BVMS Viewer in versions 10.1.0, 10.0.1, 10.0.0 and 9.0.0 and older potentially allows an attacker to execute arbitrary code on a victim's system. This affects both the installer as well as the installed application. This also affects Bosch DIVAR IP 7000 R2, Bosch DIVAR IP all-in-one 5000 and Bosch DIVAR IP all-in-one 7000 with installers and installed BVMS versions prior to BVMS 10.1.1.

Loading a DLL through an Uncontrolled Search Path Element in Bosch IP Helper up to and including version 1.00.0008 potentially allows an attacker to execute arbitrary code on a victim's system. A prerequisite is that the victim is tricked into placing a malicious DLL in the same application directory as the portable IP Helper application.

Use of Password Hash With Insufficient Computational Effort in the database of Bosch FSM-2500 server and Bosch FSM-5000 server up to and including version 5.2 allows a remote attacker with admin privileges to dump the credentials of other users and possibly recover their plain-text passwords by brute-forcing the MD5 hash.

Use of Hard-coded Credentials in the database of Bosch FSM-2500 server and Bosch FSM-5000 server up to and including version 5.2 allows an unauthenticated remote attacker to log into the database with admin-privileges. This may result in complete compromise of the confidentiality and integrity of the stored data as well as a high availability impact on the database itself. In addition, an attacker may execute arbitrary commands on the underlying operating system.

A vulnerability in the web-based management interface of Bosch PRAESIDEO until and including version 4.41 and Bosch PRAESENSA until and including version 1.10 allows an authenticated remote attacker with admin privileges to mount a stored Cross-Site-Scripting (XSS) attack against another user. When the victim logs into the management interface, the stored script code is executed in the context of his browser. A successful exploit would allow an attacker to interact with the management interface with the privileges of the victim. However, as the attacker already needs admin privileges, there is no additional impact on the management interface itself.

A vulnerability in the web-based management interface of Bosch PRAESIDEO until and including version 4.41 and Bosch PRAESENSA until and including version 1.10 allows an unauthenticated remote attacker to trigger actions on an affected system on behalf of another user (Cross-Site Request Forgery). This requires the victim to be tricked into clicking a malicious link or submitting a malicious form. A successful exploit allows the attacker to perform arbitrary actions with the privileges of the victim, e.g. creating and modifying user accounts, changing system configuration settings and cause DoS conditions. Note: For Bosch PRAESIDEO 4.31 and newer and Bosch PRAESENSA in all versions, the confidentiality impact is considered low because user credentials are not shown in the web interface.

Improper certificate validation for certain connections in the Bosch Smart Home System App for iOS prior to version 9.17.1 potentially allows to intercept video contents by performing a man-in-the-middle attack.

Improper Access Control in the Kiosk Mode functionality of Bosch Recording Station allows a local unauthenticated attacker to escape from the Kiosk Mode and access the underlying operating system.

Deserialization of Untrusted Data in the BVMS Mobile Video Service (BVMS MVS) allows an unauthenticated remote attacker to execute arbitrary code on the system. This affects Bosch BVMS versions 10.0 <= 10.0.0.1225, 9.0 <= 9.0.0.827, 8.0 <= 8.0.0.329 and 7.5 and older. This affects Bosch DIVAR IP 3000 and DIVAR IP 7000 if a vulnerable BVMS version is installed.

A path traversal vulnerability in the Bosch Video Management System (BVMS) NoTouch deployment allows an unauthenticated remote attacker to read arbitrary files from the Central Server. This affects Bosch BVMS versions 10.0 <= 10.0.0.1225, 9.0 <= 9.0.0.827, 8.0 <= 8.0.329 and 7.5 and older. This affects Bosch BVMS Viewer versions 10.0 <= 10.0.0.1225, 9.0 <= 9.0.0.827, 8.0 <= 8.0.329 and 7.5 and older. This affects Bosch DIVAR IP 3000, DIVAR IP 7000 and DIVAR IP all-in-one 5000 if a vulnerable BVMS version is installed.