Vulnerabilities

A command injection vulnerability in Brocade Fabric OS before 9.2.0c, and 9.2.1 through 9.2.1a on IP extension platforms could allow a local authenticated attacker to perform a privileged escalation via crafted use of the portcfg command. This specific exploitation is only possible on IP Extension platforms: Brocade 7810, Brocade 7840, Brocade 7850 and on Brocade X6 or X7 directors with an SX-6 Extension blade installed. The attacker must be logged into the switch via SSH or serial console to conduct the attack.

Brocade Fabric OS versions before 8.2.3e2, versions 9.0.0 through 9.2.0c, and 9.2.1 through 9.2.1a can capture the SFTP/FTP server password used for a firmware download operation initiated by SANnav or through WebEM in a weblinker core dump that is later captured via supportsave.

Possible information exposure through log file vulnerability where sensitive fields are recorded in the debug-enabled logs when debugging is turned on in Brocade SANnav before 2.3.0 and 2.2.2a

Brocade SANnav versions before 2.2.2 log Brocade Fabric OS switch passwords when debugging is enabled.

An information exposure through log file vulnerability exists in Brocade SANnav before Brocade SANnav 2.2.2, where Brocade Fabric OS Switch passwords and authorization IDs are printed in the embedded MLS DB file.

Brocade SANnav before Brocade SANnav 2.2.2 supports key exchange algorithms, which are considered weak on ports 24, 6514, 18023, 19094, and 19095.

An information exposure through log file vulnerability exists in Brocade SANnav before Brocade SANnav 2.2.2, where configuration secrets are logged in supportsave. Supportsave file is generated by an admin user troubleshooting the switch. The Logged information may include usernames and passwords, and secret keys.

A vulnerability in Brocade Fabric OS versions before 9.2.2 could allow man-in-the-middle attackers to conduct remote Service Session Hijacking that may arise from the attacker's ability to forge an SSH key while the Brocade Fabric OS Switch is performing various remote operations initiated by a switch admin.

A vulnerability in the default configuration of the Simple Network Management Protocol (SNMP) feature of Brocade Fabric OS versions before v9.0.0 could allow an authenticated, remote attacker to read data from an affected device via SNMP. The vulnerability is due to hard-coded, default community string in the configuration file for the SNMP daemon. An attacker could exploit this vulnerability by using the static community string in SNMP version 1 queries to an affected device.

A vulnerability in a password management API in Brocade Fabric OS versions before v9.2.1, v9.2.0b, v9.1.1d, and v8.2.3e prints sensitive information in log files. This could allow an authenticated user to view the server passwords for protocols such as scp and sftp. Detail. When the firmwaredownload command is incorrectly entered or points to an erroneous file, the firmware download log captures the failed command, including any password entered in the command line.

A vulnerability in the web interface in Brocade Fabric OS before v9.2.1, v9.2.0b, and v9.1.1d prints encoded session passwords on session storage for Virtual Fabric platforms. This could allow an authenticated user to view other users' session encoded passwords.

The PostgreSQL implementation in Brocade SANnav versions before 2.3.0a is vulnerable to an incorrect local authentication flaw. An attacker accessing the VM where the Brocade SANnav is installed can gain access to sensitive data inside the PostgreSQL database.

By default, SANnav OVA is shipped with root user login enabled. While protected by a password, access to root could expose SANnav to a remote attacker should they gain access to the root account.

A vulnerability in Brocade SANnav exposes Kafka in the wan interface. The vulnerability could allow an unauthenticated attacker to perform various attacks, including DOS against the Brocade SANnav.

In Brocade SANnav, before Brocade SANnav v2.3.0, syslog traffic received clear text. This could allow an unauthenticated, remote attacker to capture sensitive information.

Brocade SANnav before v2.3.0a lacks protection mechanisms on port 2377/TCP and 7946/TCP, which could allow an unauthenticated attacker to sniff the SANnav Docker information.

When a Brocade SANnav installation is upgraded from Brocade SANnav v2.2.2 to Brocade SANnav 2.3.0, TLS/SSL weak message authentication code ciphers are added by default for port 18082.

An information disclosure vulnerability exists in Brocade SANnav before v2.3.1 and v2.3.0a when Brocade SANnav instances are configured in disaster recovery mode. SQL Table names, column names, and SQL queries are collected in DR standby Supportsave. This could allow authenticated users to access the database structure and its contents.

In Brocade SANnav before Brocade SANnav v2.31 and v2.3.0a, it was observed that Docker instances inside the appliance have insecure mount points, allowing reading and writing access to sensitive files. The vulnerability could allow a sudo privileged user on the host OS to read and write access to these files.

Brocade SANnav OVA before v2.3.1 and v2.3.0a contain hard-coded credentials in the documentation that appear as the appliance's root password. The vulnerability could allow an unauthenticated attacker full access to the Brocade SANnav appliance.

In Brocade SANnav before v2.3.1, and v2.3.0a, it is possible to back up the appliance from the web interface or the command line interface ("SSH"). The resulting backups are world-readable. A local attacker can recover backup files, restore them to a new malicious appliance, and retrieve the passwords of all the switches.

Brocade SANnav versions before v2.3.0a do not correctly set permissions on files, including docker files. An unprivileged attacker who gains access to the server can read sensitive information from these files.

Brocade SANnav OVA before v2.3.1 and v2.3.0a have an insecure file permission setting that makes files world-readable. This could allow a local user without the required privileges to access sensitive information or a Java binary.

Brocade SANnav OVA before v2.3.1, and v2.3.0a, contain hardcoded TLS keys used by Docker. Note: Brocade SANnav doesn't have access to remote Docker registries.

A vulnerability affects Brocade SANnav before v2.3.1 and v2.3.0a. It allows a Brocade SANnav service to send ping commands in the background at regular intervals to gridgain.com to check if updates are available for the Component. This could make an unauthenticated, remote attacker aware of the behavior and launch a supply-chain attack against a Brocade SANnav appliance.

In Brocade SANnav server before v2.3.1 and v2.3.0a, the SSH keys inside the OVA image are identical in the VM every time SANnav is installed. Any Brocade SAnnav VM based on the official OVA images is vulnerable to MITM over SSH. An attacker can decrypt and compromise the SSH traffic to the SANnav.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints Brocade Fabric OS switch encrypted passwords in the Brocade SANnav Standby node's support save.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the encryption key in the console when a privileged user executes the script to replace the Brocade SANnav Management Portal standby node. This could provide attackers an additional, less protected path to acquiring the encryption key.

When Brocade SANnav before v2.3.1 and v2.3.0a servers are configured in Disaster Recovery mode, the encryption key is stored in the DR log files. This could provide attackers with an additional, less-protected path to acquiring the encryption key.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the Brocade SANnav password in clear text in supportsave logs when a user schedules a switch Supportsave from Brocade SANnav.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow a privileged user to print the SANnav encrypted key in PostgreSQL startup logs. This could provide attackers with an additional, less-protected path to acquiring the encryption key.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

Brocade SANnav before v2.3.1 and v2.3.0a uses the SHA-1 hash in internal SSH ports that are not open to remote connection.

The class FileTransfer implemented in Brocade SANnav before v2.3.1, v2.3.0a, uses the ssh-rsa signature scheme, which has a SHA-1 hash. The vulnerability could allow a remote, unauthenticated attacker to perform a man-in-the-middle attack.

Brocade Web Interface in Brocade Fabric OS v9.x and before v9.2.0 does not properly represent the portName to the user if the portName contains reserved characters. This could allow an authenticated user to alter the UI of the Brocade Switch and change ports display.

Remote code execution (RCE) vulnerability in Brocade Fabric OS after v9.0 and before v9.2.0 could allow an attacker to execute arbitrary code and use this to gain root access to the Brocade switch.

Brocade Fabric OS (FOS) hardware platforms running any version of Brocade Fabric OS software, which supports the license string format; contain cryptographic issues that could allow for the installation of forged or fraudulent license keys. This would allow attackers or a malicious party to forge a counterfeit license key that the Brocade Fabric OS platform would authenticate and activate as if it were a legitimate license key.

Brocade SANnav Web interface before Brocade SANnav v2.3.0 and v2.2.2a allows remote unauthenticated users to bypass web authentication and authorization.

Possible information exposure through log file vulnerability where sensitive fields are recorded in the configuration log without masking on Brocade SANnav before v2.3.0 and 2.2.2a. Notes: To access the logs, the local attacker must have access to an already collected Brocade SANnav "supportsave" outputs.

Brocade SANnav before v2.3.0 and v2.2.2a stores SNMPv3 Authentication passwords in plaintext. A privileged user could retrieve these credentials with knowledge and access to these log files. SNMP credentials could be seen in SANnav SupportSave if the capture is performed after an SNMP configuration failure causes an SNMP communication log dump.

A segmentation fault can occur in Brocade Fabric OS after Brocade Fabric OS v9.0 and before Brocade Fabric OS v9.2.0a through the passwdcfg command. This could allow an authenticated privileged user local user to crash a Brocade Fabric OS swith using the cli “passwdcfg --set -expire -minDiff“.

In Brocade Fabric OS before v9.2.0a, a local authenticated privileged user can trigger a buffer overflow condition, leading to a kernel panic with large input to buffers in the portcfgfportbuffers command.

The firmwaredownload command on Brocade Fabric OS v9.2.0 could log the FTP/SFTP/SCP server password in clear text in the SupportSave file when performing a downgrade from Fabric OS v9.2.0 to any earlier version of Fabric OS.

System files could be overwritten using the less command in Brocade Fabric OS before Brocade Fabric OS v9.1.1c and v9.2.0.

An information disclosure in the web interface of Brocade Fabric OS versions before Brocade Fabric OS v9.2.0 and v9.1.1c, could allow a remote unauthenticated attacker to get technical details about the web interface.

Through manipulation of passwords or other variables, using commands such as portcfgupload, configupload, license, myid, a non-privileged user could obtain root privileges in Brocade Fabric OS versions before Brocade Fabric OS v9.1.1c and v9.2.0.

A reflected cross-site scripting (XSS) vulnerability exists in Brocade Webtools PortSetting.html of Brocade Fabric OS version before Brocade Fabric OS v9.2.0 that could allow a remote unauthenticated attacker to execute arbitrary JavaScript code in a target user’s session with the Brocade Webtools application.

Brocade Fabric OS before Brocade Fabric OS v9.1.1c, v9.2.0 contains a vulnerability in the command line that could allow a local user to dump files under user's home directory using grep.

A buffer overflow vulnerability in “secpolicydelete” command in Brocade Fabric OS before Brocade Fabric OS v9.1.1c and v9.2.0 could allow an authenticated privileged user to crash the Brocade Fabric OS switch leading to a denial of service.

A buffer overflow vulnerability in “diagstatus” command in Brocade Fabric OS before Brocade Fabric v9.2.0 and v9.1.1c could allow an authenticated user to crash the Brocade Fabric OS switch leading to a denial of service.