Vulnerabilities

In Eclipse OpenJ9 versions up to 0.47, the JNI function GetStringUTFLength may return an incorrect value which has wrapped around. From 0.48 the value is correct but may be truncated to include a smaller number of characters.

In Eclipse Mosquito, versions from 2.0.0 through 2.0.18, if a Mosquitto broker is configured to create an outgoing bridge connection, and that bridge connection has an incoming topic configured that makes use of topic remapping, then if the remote connection sends a crafted PUBLISH packet to the broker a double free will occur with a subsequent crash of the broker.

In Eclipse Mosquitto, from version 1.3.2 through 2.0.18, if a malicious broker sends a crafted SUBACK packet with no reason codes, a client using libmosquitto may make out of bounds memory access when acting in its on_subscribe callback. This affects the mosquitto_sub and mosquitto_rr clients.

There exists a security vulnerability in Jetty's ThreadLimitHandler.getRemote() which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory.

Jetty PushSessionCacheFilter can be exploited by unauthenticated users to launch remote DoS attacks by exhausting the server’s memory.

Eclipse Jetty is a lightweight, highly scalable, Java-based web server and Servlet engine . It includes a utility class, HttpURI, for URI/URL parsing. The HttpURI class does insufficient validation on the authority segment of a URI. However the behaviour of HttpURI differs from the common browsers in how it handles a URI that would be considered invalid if fully validated against the RRC. Specifically HttpURI and the browser may differ on the value of the host extracted from an invalid URI and thus a combination of Jetty and a vulnerable browser may be vulnerable to a open redirect attack or to a SSRF attack if the URI is used after passing validation checks.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

In Eclipse Mosquitto up to version 2.0.18a, an attacker can achieve memory leaking, segmentation fault or heap-use-after-free by sending specific sequences of "CONNECT", "DISCONNECT", "SUBSCRIBE", "UNSUBSCRIBE" and "PUBLISH" packets.

In Eclipse Glassfish versions before 7.0.17, The Host HTTP parameter could cause the web application to redirect to the specified URL, when the requested endpoint is '/management/domain'. By modifying the URL value to a malicious site, an attacker may successfully launch a phishing scam and steal user credentials.

In Eclipse Dataspace Components versions 0.1.3 to 0.9.0, the Connector component filters which datasets (= data offers) another party can see in a requested catalog, to ensure that only authorized parties are able to view restricted offers. However, there is the possibility to request a single dataset, which should be subject to the same filtering process, but currently is missing the correct filtering. This enables parties to potentially see datasets they should not have access to, thereby exposing sensitive information. Exploiting this vulnerability requires knowing the ID of a restricted dataset, but some IDs may be guessed by trying out many IDs in an automated way. Affected code: DatasetResolverImpl, L76-79 https://github.com/eclipse-edc/Connector/blob/v0.9.0/core/control-plane/control-plane-catalog/src/main/java/org/eclipse/edc/connector/controlplane/catalog/DatasetResolverImpl.java

In Eclipse Dataspace Components, from version 0.5.0 and before version 0.9.0, the ConsumerPullTransferTokenValidationApiController does not check for token validity (expiry, not-before, issuance date), which can allow an attacker to bypass the check for token expiration. The issue requires to have a dataplane configured to support http proxy consumer pull AND include the module "transfer-data-plane". The affected code was marked deprecated from the version 0.6.0 in favour of Dataplane Signaling. In 0.9.0 the vulnerable code has been removed.

In Eclipse Glassfish versions prior to 7.0.10, a URL redirection vulnerability to untrusted sites existed. This vulnerability is caused by the vulnerability (CVE-2023-41080) in the Apache code included in GlassFish. This vulnerability only affects applications that are explicitly deployed to the root context ('/').

In Eclipse Vert.x version 4.3.0 to 4.5.9, the gRPC server does not limit the maximum length of message payload (Maven GAV: io.vertx:vertx-grpc-server and io.vertx:vertx-grpc-client).  This is fixed in the 4.5.10 version.  Note this does not affect the Vert.x gRPC server based grpc-java and Netty libraries (Maven GAV: io.vertx:vertx-grpc)

In Eclipse Parsson before 1.0.4 and 1.1.3, a document with a large depth of nested objects can allow an attacker to cause a Java stack overflow exception and denial of service. Eclipse Parsson allows processing (e.g. parse, generate, transform and query) JSON documents.

In Eclipse OpenJ9 release versions prior to 0.44.0 and after 0.13.0, when running with JVM option -Xgc:concurrentScavenge, the sequence generated for System.arrayCopy on the IBM Z platform with hardware and software support for guarded storage [1], could allow access to a buffer with an incorrect length value when executing an arraycopy sequence while the Concurrent Scavenge Garbage Collection cycle is active and the source and destination memory regions for arraycopy overlap. This allows read and write to addresses beyond the end of the array range.

In Eclipse Ditto versions 3.0.0 to 3.5.5, the user input of several input fields of the Eclipse Ditto Explorer User Interface https://eclipse.dev/ditto/user-interface.html was not properly neutralized and thus vulnerable to both Reflected and Stored XSS (Cross Site Scripting). Several inputs were not persisted at the backend of Eclipse Ditto, but only in local browser storage to save settings of "environments" of the UI and e.g. the last performed "search queries", resulting in a "Reflected XSS" vulnerability. However, several other inputs were persisted at the backend of Eclipse Ditto, leading to a "Stored XSS" vulnerability. Those mean that authenticated and authorized users at Eclipse Ditto can persist Things in Ditto which can - when being displayed by other users also being authorized to see those Things in the Eclipse Ditto UI - cause scripts to be executed in the browser of other users.

In Eclipse Dataspace Components from version 0.2.1 to 0.6.2, in the EDC Connector component ( https://github.com/eclipse-edc/Connector ), an attacker might obtain OAuth2 client secrets from the vault. In Eclipse Dataspace Components from version 0.2.1 to 0.6.2, we have identified a security vulnerability in the EDC Connector component ( https://github.com/eclipse-edc/Connector ) regarding the OAuth2-protected data sink feature. When using a custom, OAuth2-protected data sink, the OAuth2-specific data address properties are resolved by the provider data plane. Problematically, the consumer-provided clientSecretKey, which indicates the OAuth2 client secret to retrieve from a secrets vault, is resolved in the context of the provider's vault, not the consumer. This secret's value is then sent to the tokenUrl, also consumer-controlled, as part of an OAuth2 client credentials grant. The returned access token is then sent as a bearer token to the data sink URL. This feature is now disabled entirely, because not all code paths necessary for a successful realization were fully implemented.

Eclipse Target Management: Terminal and Remote System Explorer (RSE) version <= 4.5.400 has a remote code execution vulnerability that does not require authentication. The fixed version is included in Eclipse IDE 2024-03

In Eclipse Kura LogServlet component included in versions 5.0.0 to 5.4.1, a specifically crafted request to the servlet can allow an unauthenticated user to retrieve the device logs. Also, downloaded logs may be used by an attacker to perform privilege escalation by using the session id of an authenticated user reported in logs. This issue affects org.eclipse.kura:org.eclipse.kura.web2 version range [2.0.600, 2.4.0], which is included in Eclipse Kura version range [5.0.0, 5.4.1]

In Eclipse ThreadX before 6.4.0, xQueueCreate() and xQueueCreateSet() functions from the FreeRTOS compatibility API (utility/rtos_compatibility_layers/FreeRTOS/tx_freertos.c) were missing parameter checks. This could lead to integer wraparound, under-allocations and heap buffer overflows.

In Eclipse ThreadX before version 6.4.0, the _Mtxinit() function in the Xtensa port was missing an array size check causing a memory overwrite. The affected file was ports/xtensa/xcc/src/tx_clib_lock.c

In Eclipse ThreadX NetX Duo before 6.4.0, if an attacker can control parameters of __portable_aligned_alloc() could cause an integer wrap-around and an allocation smaller than expected. This could cause subsequent heap buffer overflows.

In Eclipse Memory Analyzer versions 0.7 to 1.14.0, report definition XML files are not filtered to prohibit document type definition (DTD) references to external entities. This means that if a user chooses to use a malicious report definition XML file containing an external entity reference to generate a report then Eclipse Memory Analyzer may access external files or URLs defined via a DTD in the report definition.

In Eclipse OpenJ9 before version 0.41.0, the JVM can be forced into an infinite busy hang on a spinlock or a segmentation fault if a shutdown signal (SIGTERM, SIGINT or SIGHUP) is received before the JVM has finished initializing.

In Eclipse IDE versions < 2023-09 (4.29) some files with xml content are parsed vulnerable against all sorts of XXE attacks. The user just needs to open any evil project or update an open project with a vulnerable file (for example for review a foreign repository or patch).

In Eclipse Parsson before versions 1.1.4 and 1.0.5, Parsing JSON from untrusted sources can lead malicious actors to exploit the fact that the built-in support for parsing numbers with large scale in Java has a number of edge cases where the input text of a number can lead to much larger processing time than one would expect. To mitigate the risk, parsson put in place a size limit for the numbers as well as their scale.

In Eclipse Glassfish 5 or 6, running with old versions of JDK (lower than 6u211, or < 7u201, or < 8u191), allows remote attackers to load malicious code on the server via access to insecure ORB listeners.

In Eclipse RAP versions from 3.0.0 up to and including 3.25.0, Remote Code Execution is possible on Windows when using the FileUpload component. The reason for this is a not completely secure extraction of the file name in the FileUploadProcessor.stripFileName(String name) method. As soon as this finds a / in the path, everything before it is removed, but potentially \ (backslashes) coming further back are kept. For example, a file name such as /..\..\webapps\shell.war can be used to upload a file to a Tomcat server under Windows, which is then saved as ..\..\webapps\shell.war in its webapps directory and can then be executed.

Arbitrary File Overwrite in Eclipse JGit <= 6.6.0 In Eclipse JGit, all versions <= 6.6.0.202305301015-r, a symbolic link present in a specially crafted git repository can be used to write a file to locations outside the working tree when this repository is cloned with JGit to a case-insensitive filesystem, or when a checkout from a clone of such a repository is performed on a case-insensitive filesystem. This can happen on checkout (DirCacheCheckout), merge (ResolveMerger via its WorkingTreeUpdater), pull (PullCommand using merge), and when applying a patch (PatchApplier). This can be exploited for remote code execution (RCE), for instance if the file written outside the working tree is a git filter that gets executed on a subsequent git command. The issue occurs only on case-insensitive filesystems, like the default filesystems on Windows and macOS. The user performing the clone or checkout must have the rights to create symbolic links for the problem to occur, and symbolic links must be enabled in the git configuration. Setting git configuration option core.symlinks = false before checking out avoids the problem. The issue was fixed in Eclipse JGit version 6.6.1.202309021850-r and 6.7.0.202309050840-r, available via Maven Central https://repo1.maven.org/maven2/org/eclipse/jgit/  and repo.eclipse.org https://repo.eclipse.org/content/repositories/jgit-releases/ . A backport is available in 5.13.3 starting from 5.13.3.202401111512-r. The JGit maintainers would like to thank RyotaK for finding and reporting this issue.

In Eclipse Openj9 before version 0.38.0, in the implementation of the shared cache (which is enabled by default in OpenJ9 builds) the size of a string is not properly checked against the size of the buffer.

In Mosquitto before 1.4.12, pattern based ACLs can be bypassed by clients that set their username/client id to '#' or '+'. This allows locally or remotely connected clients to access MQTT topics that they do have the rights to. The same issue may be present in third party authentication/access control plugins for Mosquitto.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.