Known Vulnerabilities
CVE-2024-39558
An Unchecked Return Value vulnerability in the Routing Protocol Daemon (rpd) on Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows a logically adjacent, unauthenticated attacker sending a specific PIM packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS), when PIM is configured with Multicast-only Fast Reroute (MoFRR). Continued receipt and processing of this packet may create a sustained Denial of Service (DoS) condition. This issue is observed on Junos and Junos Evolved platforms where PIM is configured along with MoFRR. MoFRR tries to select the active path, but due to an internal timing issue, rpd is unable to select the forwarding next-hop towards the source, resulting in an rpd crash. This issue affects: Junos OS: * All versions before 20.4R3-S10, * from 21.2 before 21.2R3-S7, * from 21.4 before 21.4R3-S6, * from 22.1 before 22.1R3-S5, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3, * from 22.4 before 22.4R2; Junos OS Evolved: * All versions before 20.4R3-S10 -EVO, * All versions of 21.2-EVO, * from 21.4-EVO before 21.4R3-S9-EVO, * from 22.1-EVO before 22.1R3-S5-EVO, * from 22.2-EVO before 22.2R3-S3-EVO, * from 22.3-EVO before 22.3R3-EVO, * from 22.4-EVO before 22.4R2-EVO.
CVE-2023-36836
A Use of an Uninitialized Resource vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, in a Multicast only Fast Reroute (MoFRR) scenario, the rpd process can crash when a a specific low privileged CLI command is executed. The rpd crash will impact all routing protocols until the process has automatically been restarted. As the operational state which makes this issue exploitable is outside the attackers control, this issue is considered difficult to exploit. Continued execution of this command will lead to a sustained DoS. This issue affects: Juniper Networks Junos OS 19.4 version 19.4R3-S5 and later versions prior to 19.4R3-S9; 20.1 version 20.1R2 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3-S1; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R1-S2, 22.1R2; 22.2 versions prior to 22.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S6-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-S1-EVO; 21.4-EVO versions prior to 21.4R3-EVO; 22.1-EVO versions prior to 22.1R1-S2-EVO, 22.1R2-EVO; 22.2-EVO versions prior to 22.2R2-EVO.
CVE-2023-36833
A Use After Free vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS Evolved on PTX10001-36MR, and PTX10004, PTX10008, PTX10016 with LC1201/1202 allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). The process 'aftman-bt' will crash after multiple flaps on a multicast-only fast reroute (MoFRR) enabled interface. This will cause the respective FPC to stop forwarding traffic and it needs to be rebooted to restore the service. An indication that the system experienced this issue is the following log message: <date> <hostname> evo-aftmand-bt[<pid>]: [Error] jexpr_fdb: sanity check failed, ... , app_name L3 Mcast Routes This issue affects Juniper Networks Junos OS Evolved on PTX10001-36MR, PTX10004, PTX10008, PTX10016 with LC1201/1202: 21.2 version 21.2R1-EVO and later versions; 21.3 version 21.3R1-EVO and later versions; 21.4 versions prior to 21.4R3-S3-EVO; 22.1 version 22.1R1-EVO and later versions; 22.2 versions prior to 22.2R3-S2-EVO; 22.3 versions prior to 22.3R3-EVO; 22.4 versions prior to 22.4R1-S2-EVO, 22.4R2-EVO.
CVE-2022-22238
An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). When an incoming RESV message corresponding to a protected LSP is malformed it causes an incorrect internal state resulting in an rpd core. This issue affects: Juniper Networks Junos OS All versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R3-S8; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R3; 21.3 versions prior to 21.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.2R3-S3-EVO; 20.3-EVO version 20.3R1-EVO and later versions; 20.4-EVO versions prior to 20.4R3-S1-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R2-EVO.
CVE-2022-22211
A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.
CVE-2022-22213
A vulnerability in Handling of Undefined Values in the routing protocol daemon (RPD) process of Juniper Networks Junos OS and Junos OS Evolved may allow an unauthenticated network-based attacker to crash the RPD process by sending a specific BGP update while the system is under heavy load, leading to a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. Malicious exploitation of this issue requires a very specific combination of load, timing, and configuration of the vulnerable system which is beyond the direct control of the attacker. Internal reproduction has only been possible through artificially created load and specially instrumented source code. Systems are only vulnerable to this issue if BGP multipath is enabled. Routers not configured for BGP multipath are not vulnerable to this issue. This issue affects: Juniper Networks Junos OS: 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R2-S2, 21.2R3; 21.3 versions prior to 21.3R2, 21.3R3; 21.4 versions prior to 21.4R1-S1, 21.4R2. Juniper Networks Junos OS Evolved: 21.1 versions prior to 21.1R3-S1-EVO; 21.2 version 21.2R1-EVO and later versions; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R1-S1-EVO, 21.4R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.1. Juniper Networks Junos OS Evolved versions prior to 21.1-EVO.
CVE-2021-31356
A command injection vulnerability in command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S1-EVO; All versions of 21.1-EVO and 21.2-EVO.