Known Vulnerabilities
CVE-2024-57939
In the Linux kernel, the following vulnerability has been resolved: riscv: Fix sleeping in invalid context in die() die() can be called in exception handler, and therefore cannot sleep. However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled. That causes the following warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex preempt_count: 110001, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234 Hardware name: riscv-virtio,qemu (DT) Call Trace: dump_backtrace+0x1c/0x24 show_stack+0x2c/0x38 dump_stack_lvl+0x5a/0x72 dump_stack+0x14/0x1c __might_resched+0x130/0x13a rt_spin_lock+0x2a/0x5c die+0x24/0x112 do_trap_insn_illegal+0xa0/0xea _new_vmalloc_restore_context_a0+0xcc/0xd8 Oops - illegal instruction [#1] Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT enabled.
CVE-2024-56703
In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix soft lockups in fib6_select_path under high next hop churn Soft lockups have been observed on a cluster of Linux-based edge routers located in a highly dynamic environment. Using the `bird` service, these routers continuously update BGP-advertised routes due to frequently changing nexthop destinations, while also managing significant IPv6 traffic. The lockups occur during the traversal of the multipath circular linked-list in the `fib6_select_path` function, particularly while iterating through the siblings in the list. The issue typically arises when the nodes of the linked list are unexpectedly deleted concurrently on a different core—indicated by their 'next' and 'previous' elements pointing back to the node itself and their reference count dropping to zero. This results in an infinite loop, leading to a soft lockup that triggers a system panic via the watchdog timer. Apply RCU primitives in the problematic code sections to resolve the issue. Where necessary, update the references to fib6_siblings to annotate or use the RCU APIs. Include a test script that reproduces the issue. The script periodically updates the routing table while generating a heavy load of outgoing IPv6 traffic through multiple iperf3 clients. It consistently induces infinite soft lockups within a couple of minutes. Kernel log: 0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb 1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3 2 [ffffbd13003e8e58] panic at ffffffff8cef65d4 3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03 4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f 5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756 6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af 7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d -- <IRQ stack> -- 8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb [exception RIP: fib6_select_path+299] RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287 RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000 RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618 RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830 R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c 10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c 11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5 12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47 13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0 14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274 15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474 16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615 17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec 18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3 19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9 20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice] 21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice] 22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice] 23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000 24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581 25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9 26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47 27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30 28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f 29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64 30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
CVE-2024-56583
In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix warning in migrate_enable for boosted tasks When running the following command: while true; do stress-ng --cyclic 30 --timeout 30s --minimize --quiet done a warning is eventually triggered: WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794 setup_new_dl_entity+0x13e/0x180 ... Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? enqueue_dl_entity+0x631/0x6e0 ? setup_new_dl_entity+0x13e/0x180 ? __warn+0x7e/0xd0 ? report_bug+0x11a/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 enqueue_dl_entity+0x631/0x6e0 enqueue_task_dl+0x7d/0x120 __do_set_cpus_allowed+0xe3/0x280 __set_cpus_allowed_ptr_locked+0x140/0x1d0 __set_cpus_allowed_ptr+0x54/0xa0 migrate_enable+0x7e/0x150 rt_spin_unlock+0x1c/0x90 group_send_sig_info+0xf7/0x1a0 ? kill_pid_info+0x1f/0x1d0 kill_pid_info+0x78/0x1d0 kill_proc_info+0x5b/0x110 __x64_sys_kill+0x93/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f0dab31f92b This warning occurs because set_cpus_allowed dequeues and enqueues tasks with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning is triggered. A boosted task already had its parameters set by rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary, hence the WARN_ON call. Check if we are requeueing a boosted task and avoid calling setup_new_dl_entity if that's the case.
CVE-2024-56581
In the Linux kernel, the following vulnerability has been resolved: btrfs: ref-verify: fix use-after-free after invalid ref action At btrfs_ref_tree_mod() after we successfully inserted the new ref entry (local variable 'ref') into the respective block entry's rbtree (local variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF, we error out and free the ref entry without removing it from the block entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call btrfs_free_ref_cache(), which iterates over all block entries and then calls free_block_entry() for each one, and there we will trigger a use-after-free when we are called against the block entry to which we added the freed ref entry to its rbtree, since the rbtree still points to the block entry, as we didn't remove it from the rbtree before freeing it in the error path at btrfs_ref_tree_mod(). Fix this by removing the new ref entry from the rbtree before freeing it. Syzbot report this with the following stack traces: BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314 btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline] btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23 btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482 btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293 vfs_unlink+0x365/0x650 fs/namei.c:4469 do_unlinkat+0x4ae/0x830 fs/namei.c:4533 __do_sys_unlinkat fs/namei.c:4576 [inline] __se_sys_unlinkat fs/namei.c:4569 [inline] __x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1 __btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521 update_ref_for_cow+0x96a/0x11f0 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline] __btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137 __btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171 btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313 prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586 relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538 BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_i ---truncated---
CVE-2022-49013
In the Linux kernel, the following vulnerability has been resolved: sctp: fix memory leak in sctp_stream_outq_migrate() When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
CVE-2024-47747
In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove.
CVE-2024-45006
In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.
CVE-2024-44995
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it.
CVE-2024-42292
In the Linux kernel, the following vulnerability has been resolved: kobject_uevent: Fix OOB access within zap_modalias_env() zap_modalias_env() wrongly calculates size of memory block to move, so will cause OOB memory access issue if variable MODALIAS is not the last one within its @env parameter, fixed by correcting size to memmove.
CVE-2024-42267
In the Linux kernel, the following vulnerability has been resolved: riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error() Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly kill the process and we don't BUG() the kernel.
CVE-2022-48775
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put().
CVE-2024-39506
In the Linux kernel, the following vulnerability has been resolved: liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2023-52864
In the Linux kernel, the following vulnerability has been resolved: platform/x86: wmi: Fix opening of char device Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device using container_of(). This also avoids wmi_char_open() picking a wrong WMI device bound to a driver with the same name as the original driver.
CVE-2023-52847
In the Linux kernel, the following vulnerability has been resolved: media: bttv: fix use after free error due to btv->timeout timer There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe ->timer_setup ->bttv_set_dma ->mod_timer; bttv_remove ->kfree(btv); ->bttv_irq_timeout ->USE btv
CVE-2023-52761
In the Linux kernel, the following vulnerability has been resolved: riscv: VMAP_STACK overflow detection thread-safe commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]---
CVE-2023-52747
In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Restore allocated resources on failed copyout Fix a resource leak if an error occurs.
CVE-2021-47424
In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized.
CVE-2021-47414
In the Linux kernel, the following vulnerability has been resolved: riscv: Flush current cpu icache before other cpus On SiFive Unmatched, I recently fell onto the following BUG when booting: [ 0.000000] ftrace: allocating 36610 entries in 144 pages [ 0.000000] Oops - illegal instruction [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5 [ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT) [ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a [ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10 [ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000 [ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60 [ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10 [ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43 [ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001 [ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000 [ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008 [ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002 [ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26 [ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a [ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32 [ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c [ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360 [ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130 [ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6 [ 0.000000] ---[ end trace f67eb9af4d8d492b ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- While ftrace is looping over a list of addresses to patch, it always failed when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the backtrace, the illegal instruction is encountered in this same function. However, patch_text_nosync, after patching the instructions, calls flush_icache_range. But looking at what happens in this function: flush_icache_range -> flush_icache_all -> sbi_remote_fence_i -> __sbi_rfence_v02 -> riscv_cpuid_to_hartid_mask The icache and dcache of the current cpu are never synchronized between the patching of riscv_cpuid_to_hartid_mask and calling this same function. So fix this by flushing the current cpu's icache before asking for the other cpus to do the same.
CVE-2021-47240
In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix OOB Read in qrtr_endpoint_post Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block.
CVE-2024-35871
In the Linux kernel, the following vulnerability has been resolved: riscv: process: Fix kernel gp leakage childregs represents the registers which are active for the new thread in user context. For a kernel thread, childregs->gp is never used since the kernel gp is not touched by switch_to. For a user mode helper, the gp value can be observed in user space after execve or possibly by other means. [From the email thread] The /* Kernel thread */ comment is somewhat inaccurate in that it is also used for user_mode_helper threads, which exec a user process, e.g. /sbin/init or when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have PF_KTHREAD set and are valid targets for ptrace etc. even before they exec. childregs is the *user* context during syscall execution and it is observable from userspace in at least five ways: 1. kernel_execve does not currently clear integer registers, so the starting register state for PID 1 and other user processes started by the kernel has sp = user stack, gp = kernel __global_pointer$, all other integer registers zeroed by the memset in the patch comment. This is a bug in its own right, but I'm unwilling to bet that it is the only way to exploit the issue addressed by this patch. 2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread before it execs, but ptrace requires SIGSTOP to be delivered which can only happen at user/kernel boundaries. 3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for user_mode_helpers before the exec completes, but gp is not one of the registers it returns. 4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses are also exposed via PERF_SAMPLE_REGS_USER which is permitted under LOCKDOWN_PERF. I have not attempted to write exploit code. 5. Much of the tracing infrastructure allows access to user registers. I have not attempted to determine which forms of tracing allow access to user registers without already allowing access to kernel registers.
CVE-2023-52683
In the Linux kernel, the following vulnerability has been resolved: ACPI: LPIT: Avoid u32 multiplication overflow In lpit_update_residency() there is a possibility of overflow in multiplication, if tsc_khz is large enough (> UINT_MAX/1000). Change multiplication to mul_u32_u32(). Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2024-27413
In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect allocation size gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures is not enough for a 64-bit phys_addr_t: drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open': drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size] 295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL); | ^ Use the correct type instead here.
CVE-2022-48693
In the Linux kernel, the following vulnerability has been resolved: soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs In brcmstb_pm_probe(), there are two kinds of leak bugs: (1) we need to add of_node_put() when for_each__matching_node() breaks (2) we need to add iounmap() for each iomap in fail path
CVE-2024-27004
In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be ---truncated---
CVE-2024-26984
In the Linux kernel, the following vulnerability has been resolved: nouveau: fix instmem race condition around ptr stores Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb.
CVE-2024-26876
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: adv7511: fix crash on irq during probe Moved IRQ registration down to end of adv7511_probe(). If an IRQ already is pending during adv7511_probe (before adv7511_cec_init) then cec_received_msg_ts could crash using uninitialized data: Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5 Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP Call trace: cec_received_msg_ts+0x48/0x990 [cec] adv7511_cec_irq_process+0x1cc/0x308 [adv7511] adv7511_irq_process+0xd8/0x120 [adv7511] adv7511_irq_handler+0x1c/0x30 [adv7511] irq_thread_fn+0x30/0xa0 irq_thread+0x14c/0x238 kthread+0x190/0x1a8
CVE-2024-26759
In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [[email protected]: v4]
CVE-2024-26751
In the Linux kernel, the following vulnerability has been resolved: ARM: ep93xx: Add terminator to gpiod_lookup_table Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops.
CVE-2024-26736
In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
CVE-2021-47100
In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandl ---truncated---
CVE-2021-47073
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems where the Dell WMI interface is supported. While exit_dell_smbios_wmi() unregisters it unconditionally, this leads to the following oops: [ 175.722921] ------------[ cut here ]------------ [ 175.722925] Unexpected driver unregister! [ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40 ... [ 175.723089] Call Trace: [ 175.723094] cleanup_module+0x5/0xedd [dell_smbios] ... [ 175.723148] ---[ end trace 064c34e1ad49509d ]--- Make the unregister happen on the same condition the register happens to fix this.
CVE-2021-47010
In the Linux kernel, the following vulnerability has been resolved: net: Only allow init netns to set default tcp cong to a restricted algo tcp_set_default_congestion_control() is netns-safe in that it writes to &net->ipv4.tcp_congestion_control, but it also sets ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced. This has the unintended side-effect of changing the global net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control readonly in non-init netns") Resolve this netns "leak" by only allowing the init netns to set the default algorithm to one that is restricted. This restriction could be removed if tcp_allowed_congestion_control were namespace-ified in the future. This bug was uncovered with https://github.com/JonathonReinhart/linux-netns-sysctl-verify
CVE-2020-36783
In the Linux kernel, the following vulnerability has been resolved: i2c: img-scb: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in functions img_i2c_xfer and img_i2c_init. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.
CVE-2021-46934
In the Linux kernel, the following vulnerability has been resolved: i2c: validate user data in compat ioctl Wrong user data may cause warning in i2c_transfer(), ex: zero msgs. Userspace should not be able to trigger warnings, so this patch adds validation checks for user data in compact ioctl to prevent reported warnings
CVE-2021-46921
In the Linux kernel, the following vulnerability has been resolved: locking/qrwlock: Fix ordering in queued_write_lock_slowpath() While this code is executed with the wait_lock held, a reader can acquire the lock without holding wait_lock. The writer side loops checking the value with the atomic_cond_read_acquire(), but only truly acquires the lock when the compare-and-exchange is completed successfully which isn’t ordered. This exposes the window between the acquire and the cmpxchg to an A-B-A problem which allows reads following the lock acquisition to observe values speculatively before the write lock is truly acquired. We've seen a problem in epoll where the reader does a xchg while holding the read lock, but the writer can see a value change out from under it. Writer | Reader -------------------------------------------------------------------------------- ep_scan_ready_list() | |- write_lock_irq() | |- queued_write_lock_slowpath() | |- atomic_cond_read_acquire() | | read_lock_irqsave(&ep->lock, flags); --> (observes value before unlock) | chain_epi_lockless() | | epi->next = xchg(&ep->ovflist, epi); | | read_unlock_irqrestore(&ep->lock, flags); | | | atomic_cmpxchg_relaxed() | |-- READ_ONCE(ep->ovflist); | A core can order the read of the ovflist ahead of the atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire semantics addresses this issue at which point the atomic_cond_read can be switched to use relaxed semantics. [peterz: use try_cmpxchg()]