Known Vulnerabilities
CVE-2024-39480
In the Linux kernel, the following vulnerability has been resolved: kdb: Fix buffer overflow during tab-complete Currently, when the user attempts symbol completion with the Tab key, kdb will use strncpy() to insert the completed symbol into the command buffer. Unfortunately it passes the size of the source buffer rather than the destination to strncpy() with predictably horrible results. Most obviously if the command buffer is already full but cp, the cursor position, is in the middle of the buffer, then we will write past the end of the supplied buffer. Fix this by replacing the dubious strncpy() calls with memmove()/memcpy() calls plus explicit boundary checks to make sure we have enough space before we start moving characters around.
CVE-2024-38623
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use variable length array instead of fixed size Should fix smatch warning: ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256)
CVE-2022-48754
In the Linux kernel, the following vulnerability has been resolved: phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device().
CVE-2022-48748
In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix memory leak in __allowed_ingress When using per-vlan state, if vlan snooping and stats are disabled, untagged or priority-tagged ingress frame will go to check pvid state. If the port state is forwarding and the pvid state is not learning/forwarding, untagged or priority-tagged frame will be dropped but skb memory is not freed. Should free skb when __allowed_ingress returns false.
CVE-2022-48747
In the Linux kernel, the following vulnerability has been resolved: block: Fix wrong offset in bio_truncate() bio_truncate() clears the buffer outside of last block of bdev, however current bio_truncate() is using the wrong offset of page. So it can return the uninitialized data. This happened when both of truncated/corrupted FS and userspace (via bdev) are trying to read the last of bdev.
CVE-2022-48716
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd938x: fix incorrect used of portid Mixer controls have the channel id in mixer->reg, which is not same as port id. port id should be derived from chan_info array. So fix this. Without this, its possible that we could corrupt struct wcd938x_sdw_priv by accessing port_map array out of range with channel id instead of port id.
CVE-2024-38612
In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn't called. This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path.
CVE-2024-38605
In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix NULL module pointer assignment at card init The commit 81033c6b584b ("ALSA: core: Warn on empty module") introduced a WARN_ON() for a NULL module pointer passed at snd_card object creation, and it also wraps the code around it with '#ifdef MODULE'. This works in most cases, but the devils are always in details. "MODULE" is defined when the target code (i.e. the sound core) is built as a module; but this doesn't mean that the caller is also built-in or not. Namely, when only the sound core is built-in (CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m), the passed module pointer is ignored even if it's non-NULL, and card->module remains as NULL. This would result in the missing module reference up/down at the device open/close, leading to a race with the code execution after the module removal. For addressing the bug, move the assignment of card->module again out of ifdef. The WARN_ON() is still wrapped with ifdef because the module can be really NULL when all sound drivers are built-in. Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would lead to a false-positive NULL module check. Admittedly it won't catch perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no real problem as it's only for debugging, and the condition is pretty rare.
CVE-2024-38573
In the Linux kernel, the following vulnerability has been resolved: cppc_cpufreq: Fix possible null pointer dereference cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from different places with various parameters. So cpufreq_cpu_get() can return null as 'policy' in some circumstances. Fix this bug by adding null return check. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2024-36897
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Atom Integrated System Info v2_2 for DCN35 New request from KMD/VBIOS in order to support new UMA carveout model. This fixes a null dereference from accessing Ctx->dc_bios->integrated_info while it was NULL. DAL parses through the BIOS and extracts the necessary integrated_info but was missing a case for the new BIOS version 2.3.
CVE-2024-36894
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete FFS based applications can utilize the aio_cancel() callback to dequeue pending USB requests submitted to the UDC. There is a scenario where the FFS application issues an AIO cancel call, while the UDC is handling a soft disconnect. For a DWC3 based implementation, the callstack looks like the following: DWC3 Gadget FFS Application dwc3_gadget_soft_disconnect() ... --> dwc3_stop_active_transfers() --> dwc3_gadget_giveback(-ESHUTDOWN) --> ffs_epfile_async_io_complete() ffs_aio_cancel() --> usb_ep_free_request() --> usb_ep_dequeue() There is currently no locking implemented between the AIO completion handler and AIO cancel, so the issue occurs if the completion routine is running in parallel to an AIO cancel call coming from the FFS application. As the completion call frees the USB request (io_data->req) the FFS application is also referencing it for the usb_ep_dequeue() call. This can lead to accessing a stale/hanging pointer. commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") relocated the usb_ep_free_request() into ffs_epfile_async_io_complete(). However, in order to properly implement locking to mitigate this issue, the spinlock can't be added to ffs_epfile_async_io_complete(), as usb_ep_dequeue() (if successfully dequeuing a USB request) will call the function driver's completion handler in the same context. Hence, leading into a deadlock. Fix this issue by moving the usb_ep_free_request() back to ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req to NULL after freeing it within the ffs->eps_lock. This resolves the race condition above, as the ffs_aio_cancel() routine will not continue attempting to dequeue a request that has already been freed, or the ffs_user_copy_work() not freeing the USB request until the AIO cancel is done referencing it. This fix depends on commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently")
CVE-2024-36016
In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix possible out-of-bounds in gsm0_receive() Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size.
CVE-2021-47551
In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again.
CVE-2021-47548
In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns.
CVE-2021-47519
In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.
CVE-2021-47503
In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc() Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host()
CVE-2024-35997
In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up The flag I2C_HID_READ_PENDING is used to serialize I2C operations. However, this is not necessary, because I2C core already has its own locking for that. More importantly, this flag can cause a lock-up: if the flag is set in i2c_hid_xfer() and an interrupt happens, the interrupt handler (i2c_hid_irq) will check this flag and return immediately without doing anything, then the interrupt handler will be invoked again in an infinite loop. Since interrupt handler is an RT task, it takes over the CPU and the flag-clearing task never gets scheduled, thus we have a lock-up. Delete this unnecessary flag.
CVE-2024-35960
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Properly link new fs rules into the tree Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle.
CVE-2023-52672
In the Linux kernel, the following vulnerability has been resolved: pipe: wakeup wr_wait after setting max_usage Commit c73be61cede5 ("pipe: Add general notification queue support") a regression was introduced that would lock up resized pipes under certain conditions. See the reproducer in [1]. The commit resizing the pipe ring size was moved to a different function, doing that moved the wakeup for pipe->wr_wait before actually raising pipe->max_usage. If a pipe was full before the resize occured it would result in the wakeup never actually triggering pipe_write. Set @max_usage and @nr_accounted before waking writers if this isn't a watch queue. [Christian Brauner <[email protected]>: rewrite to account for watch queues]
CVE-2023-52670
In the Linux kernel, the following vulnerability has been resolved: rpmsg: virtio: Free driver_override when rpmsg_remove() Free driver_override when rpmsg_remove(), otherwise the following memory leak will occur: unreferenced object 0xffff0000d55d7080 (size 128): comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s) hex dump (first 32 bytes): 72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320 [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70 [<00000000228a60c3>] kstrndup+0x4c/0x90 [<0000000077158695>] driver_set_override+0xd0/0x164 [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170 [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30 [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280 [<00000000443331cc>] really_probe+0xbc/0x2dc [<00000000391064b1>] __driver_probe_device+0x78/0xe0 [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160 [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140 [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4 [<000000003b929a36>] __device_attach+0x9c/0x19c [<00000000a94e0ba8>] device_initial_probe+0x14/0x20 [<000000003c999637>] bus_probe_device+0xa0/0xac
CVE-2024-35801
In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
CVE-2024-27053
In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RCU usage in connect path With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data
CVE-2024-26976
In the Linux kernel, the following vulnerability has been resolved: KVM: Always flush async #PF workqueue when vCPU is being destroyed Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its completion queue, e.g. when a VM and all its vCPUs is being destroyed. KVM must ensure that none of its workqueue callbacks is running when the last reference to the KVM _module_ is put. Gifting a reference to the associated VM prevents the workqueue callback from dereferencing freed vCPU/VM memory, but does not prevent the KVM module from being unloaded before the callback completes. Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will result in deadlock. async_pf_execute() can't return until kvm_put_kvm() finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes: WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm] Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events async_pf_execute [kvm] RIP: 0010:kvm_put_kvm+0x2d/0x320 [kvm] Call Trace: <TASK> async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- INFO: task kworker/8:1:251 blocked for more than 120 seconds. Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/8:1 state:D stack:0 pid:251 ppid:2 flags:0x00004000 Workqueue: events async_pf_execute [kvm] Call Trace: <TASK> __schedule+0x33f/0xa40 schedule+0x53/0xc0 schedule_timeout+0x12a/0x140 __wait_for_common+0x8d/0x1d0 __flush_work.isra.0+0x19f/0x2c0 kvm_clear_async_pf_completion_queue+0x129/0x190 [kvm] kvm_arch_destroy_vm+0x78/0x1b0 [kvm] kvm_put_kvm+0x1c1/0x320 [kvm] async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> If kvm_clear_async_pf_completion_queue() actually flushes the workqueue, then there's no need to gift async_pf_execute() a reference because all invocations of async_pf_execute() will be forced to complete before the vCPU and its VM are destroyed/freed. And that in turn fixes the module unloading bug as __fput() won't do module_put() on the last vCPU reference until the vCPU has been freed, e.g. if closing the vCPU file also puts the last reference to the KVM module. Note that kvm_check_async_pf_completion() may also take the work item off the completion queue and so also needs to flush the work queue, as the work will not be seen by kvm_clear_async_pf_completion_queue(). Waiting on the workqueue could theoretically delay a vCPU due to waiting for the work to complete, but that's a very, very small chance, and likely a very small delay. kvm_arch_async_page_present_queued() unconditionally makes a new request, i.e. will effectively delay entering the guest, so the remaining work is really just: trace_kvm_async_pf_completed(addr, cr2_or_gpa); __kvm_vcpu_wake_up(vcpu); mmput(mm); and mmput() can't drop the last reference to the page tables if the vCPU is still alive, i.e. the vCPU won't get stuck tearing down page tables. Add a helper to do the flushing, specifically to deal with "wakeup all" work items, as they aren't actually work items, i.e. are never placed in a workqueue. Trying to flush a bogus workqueue entry rightly makes __flush_work() complain (kudos to whoever added that sanity check). Note, commit 5f6de5cbebee ("KVM: Prevent module exit until al ---truncated---
CVE-2022-48662
In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Really move i915_gem_context.link under ref protection i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915] [ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff [ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202 [ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000 [ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68 [ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc [ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860 [ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc [ 4070.575016] FS: 00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000 [ 4070.575021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0 [ 4070.575029] Call Trace: [ 4070.575033] <TASK> [ 4070.575037] lrc_configure_all_contexts+0x13e/0x150 [i915] [ 4070.575103] gen8_enable_metric_set+0x4d/0x90 [i915] [ 4070.575164] i915_perf_open_ioctl+0xbc0/0x1500 [i915] [ 4070.575224] ? asm_common_interrupt+0x1e/0x40 [ 4070.575232] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575290] drm_ioctl_kernel+0x85/0x110 [ 4070.575296] ? update_load_avg+0x5f/0x5e0 [ 4070.575302] drm_ioctl+0x1d3/0x370 [ 4070.575307] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575382] ? gen8_gt_irq_handler+0x46/0x130 [i915] [ 4070.575445] __x64_sys_ioctl+0x3c4/0x8d0 [ 4070.575451] ? __do_softirq+0xaa/0x1d2 [ 4070.575456] do_syscall_64+0x35/0x80 [ 4070.575461] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4070.575467] RIP: 0033:0x7f1ed5c10397 [ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397 [ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006 [ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005 [ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a [ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0 [ 4070.575505] </TASK> [ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus ---truncated---
CVE-2024-26907
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated---
CVE-2024-26875
In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix uaf in pvr2_context_set_notify [Syzbot reported] BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35 Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26 CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.8.0-rc1-syzkaller-00046-gf1a27f081c1f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35 pvr2_context_notify drivers/media/usb/pvrusb2/pvrusb2-context.c:95 [inline] pvr2_context_disconnect+0x94/0xb0 drivers/media/usb/pvrusb2/pvrusb2-context.c:272 Freed by task 906: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x106/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kfree+0x105/0x340 mm/slub.c:4409 pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:137 [inline] pvr2_context_thread_func+0x69d/0x960 drivers/media/usb/pvrusb2/pvrusb2-context.c:158 [Analyze] Task A set disconnect_flag = !0, which resulted in Task B's condition being met and releasing mp, leading to this issue. [Fix] Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect() to avoid this issue.
CVE-2024-26852
In the Linux kernel, the following vulnerability has been resolved: net/ipv6: avoid possible UAF in ip6_route_mpath_notify() syzbot found another use-after-free in ip6_route_mpath_notify() [1] Commit f7225172f25a ("net/ipv6: prevent use after free in ip6_route_mpath_notify") was not able to fix the root cause. We need to defer the fib6_info_release() calls after ip6_route_mpath_notify(), in the cleanup phase. [1] BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0 Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037 CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x167/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x180 mm/kasan/report.c:601 rt6_fill_node+0x1460/0x1ac0 inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184 ip6_route_mpath_notify net/ipv6/route.c:5198 [inline] ip6_route_multipath_add net/ipv6/route.c:5404 [inline] inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f73dd87dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858 </TASK> Allocated by task 23037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:372 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3981 [inline] __kmalloc+0x22e/0x490 mm/slub.c:3994 kmalloc include/linux/slab.h:594 [inline] kzalloc include/linux/slab.h:711 [inline] fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155 ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758 ip6_route_multipath_add net/ipv6/route.c:5298 [inline] inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Freed by task 16: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640 poison_slab_object+0xa6/0xe0 m ---truncated---
CVE-2021-47186
In the Linux kernel, the following vulnerability has been resolved: tipc: check for null after calling kmemdup kmemdup can return a null pointer so need to check for it, otherwise the null key will be dereferenced later in tipc_crypto_key_xmit as can be seen in the trace [1]. [1] https://syzkaller.appspot.com/bug?id=bca180abb29567b189efdbdb34cbf7ba851c2a58
CVE-2023-52602
In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds Read in dtSearch Currently while searching for current page in the sorted entry table of the page there is a out of bound access. Added a bound check to fix the error. Dave: Set return code to -EIO
CVE-2021-47089
In the Linux kernel, the following vulnerability has been resolved: kfence: fix memory leak when cat kfence objects Hulk robot reported a kmemleak problem: unreferenced object 0xffff93d1d8cc02e8 (size 248): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: seq_open+0x2a/0x80 full_proxy_open+0x167/0x1e0 do_dentry_open+0x1e1/0x3a0 path_openat+0x961/0xa20 do_filp_open+0xae/0x120 do_sys_openat2+0x216/0x2f0 do_sys_open+0x57/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff93d419854000 (size 4096): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0 30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12- backtrace: seq_read_iter+0x313/0x440 seq_read+0x14b/0x1a0 full_proxy_read+0x56/0x80 vfs_read+0xa5/0x1b0 ksys_read+0xa0/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I find that we can easily reproduce this problem with the following commands: cat /sys/kernel/debug/kfence/objects echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak The leaked memory is allocated in the stack below: do_syscall_64 do_sys_open do_dentry_open full_proxy_open seq_open ---> alloc seq_file vfs_read full_proxy_read seq_read seq_read_iter traverse ---> alloc seq_buf And it should have been released in the following process: do_syscall_64 syscall_exit_to_user_mode exit_to_user_mode_prepare task_work_run ____fput __fput full_proxy_release ---> free here However, the release function corresponding to file_operations is not implemented in kfence. As a result, a memory leak occurs. Therefore, the solution to this problem is to implement the corresponding release function.
CVE-2024-26598
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt.