Vulnerabilities

Multiple TP-LINK products allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Affected products/versions are as follows: Archer AX50 firmware versions prior to 'Archer AX50(JP)_V1_230529', Archer A10 firmware versions prior to 'Archer A10(JP)_V2_230504', Archer AX10 firmware versions prior to 'Archer AX10(JP)_V1.2_230508', and Archer AX11000 firmware versions prior to 'Archer AX11000(JP)_V1_230523'.

Archer AX6000 firmware versions prior to 'Archer AX6000(JP)_V1_1.3.0 Build 20221208' allows a network-adjacent authenticated attacker to execute arbitrary OS commands.

TP-Link WR841N V8, TP-Link TL-WR940N V2, and TL-WR941ND V5 were discovered to contain a buffer overflow via the radiusSecret parameter at /userRpm/WlanSecurityRpm.

TP-Link TL-WR941ND V6 were discovered to contain a buffer overflow via the pSize parameter at /userRpm/PingIframeRpm.

TP-Link TL-WR940N V2, TP-Link TL-WR941ND V5 and TP-Link TL-WR841N V8 were discovered to contain a buffer overflow via the component /userRpm/AccessCtrlAccessRulesRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link Archer AX21(US)_V3_1.1.4 Build 20230219 and AX21(US)_V3.6_1.1.4 Build 20230219 are vulnerable to Buffer Overflow.

TP-LINK Archer C50v2 Archer C50(US)_V2_160801, TP-LINK Archer C20v1 Archer_C20_V1_150707, and TP-LINK Archer C2v1 Archer_C2_US__V1_170228 were discovered to contain a buffer overflow which may lead to a Denial of Service (DoS) when parsing crafted data.

TP-Link TL-WR940N V4 was discovered to contain a buffer overflow via the ipStart parameter at /userRpm/WanDynamicIpV6CfgRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V4, TL-WR841N V8/V10, TL-WR740N V1/V2, TL-WR940N V2/V3, and TL-WR941ND V5/V6 were discovered to contain a buffer overflow in the component /userRpm/AccessCtrlTimeSchedRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

A vulnerability has been found in TP-Link Archer C7v2 v2_en_us_180114 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component GET Request Parameter Handler. The manipulation leads to denial of service. The attack can only be done within the local network. The associated identifier of this vulnerability is VDB-228775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR940N 6_211111 3.20.1(US) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the incorrect implementation of the authentication algorithm. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-17332.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR841N TL-WR841N(US)_V14_220121 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the ated_tp service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-17356.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of TP-Link TL-WR940N 6_211111 3.20.1(US) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of sufficient randomness in the sequnce numbers used for session managment. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-18334.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of proper access control. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-13911.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link AC1750 1.1.4 Build 20211022 rel.59103(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the NetUSB.ko module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-15769.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13993.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link AC1750 prior to 211210 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the NetUSB.ko kernel module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15773.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13992.

A vulnerability was found in TP-Link Archer C50 V2_160801. It has been rated as problematic. Affected by this issue is some unknown functionality of the component Web Management Interface. The manipulation leads to denial of service. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221552.

TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. Under the certain conditions, an attacker may impersonate an administrator of the product. As a result, information may be obtained and/or the product's settings may be altered with the privilege of the administrator.

In TP-Link routers, Archer C5 and WR710N-V1, running the latest available code, when receiving HTTP Basic Authentication the httpd service can be sent a crafted packet that causes a heap overflow. This can result in either a DoS (by crashing the httpd process) or an arbitrary code execution.

TP-Link routers, Archer C5 and WR710N-V1, using the latest software, the strcmp function used for checking credentials in httpd, is susceptible to a side-channel attack. By measuring the response time of the httpd process, an attacker could guess each byte of the username and password.

tdpServer of TP-Link RE300 V1 improperly processes its input, which may allow an attacker to cause a denial-of-service (DoS) condition of the product's OneMesh function.

TP-Link Tapo C200 IP camera, on its 1.1.15 firmware version and below, is affected by an unauthenticated RCE vulnerability, present in the uhttpd binary running by default as root. The exploitation of this vulnerability allows an attacker to take full control of the camera.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of file name extensions. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13910.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link AC1750 prior to 1.1.4 Build 20211022 rel.59103(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the NetUSB.ko module. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15835.

The vulnerability exists in TP-Link TL-WR841N V11 3.16.9 Build 160325 Rel.62500n wireless router due to transmission of authentication information in cleartextbase64 format. Successful exploitation of this vulnerability could allow a remote attacker to intercept credentials and subsequently perform administrative operations on the affected device through web-based management interface.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link TL-WA1201 1.0.1 Build 20200709 rel.66244(5553) wireless access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14656.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer C90 1.0.6 Build 20200114 rel.73164(5553) routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14655.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Archer A7 AC1750 1.0.15 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of MAC addresses by the tdpServer endpoint. A crafted TCP message can write stack pointers to the stack. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-12306.

This vulnerability allows a firewall bypass on affected installations of TP-Link Archer A7 prior to Archer C7(US)_V5_210125 and Archer A7(US)_V5_200220 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of IPv6 connections. The issue results from the lack of proper filtering of IPv6 SSH connections. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-12309.

This vulnerability allows network-adjacent attackers to escalate privileges on affected installations of TP-Link TL-WA855RE Firmware Ver: 855rev4-up-ver1-0-1-P1[20191213-rel60361] Wi-Fi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the first-time setup process. The issue results from the lack of proper validation on first-time setup requests. An attacker can leverage this vulnerability to reset the password for the Admin account and execute code in the context of the device. Was ZDI-CAN-10003.

This vulnerability allows remote attackers to bypass authentication on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SSH port forwarding requests during initial setup. The issue results from the lack of proper authentication prior to establishing SSH port forwarding rules. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the WAN interface. Was ZDI-CAN-9664.

This vulnerability allows a firewall bypass on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of IPv6 connections. The issue results from the lack of proper filtering of IPv6 SSH connections. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9663.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tmpServer service, which listens on TCP port 20002. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9662.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. The issue results from the lack of proper validation of DNS reponses prior to further processing. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the root user. Was ZDI-CAN-9661.

This vulnerability allows network-adjacent attackers execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tdpServer service, which listens on UDP port 20002 by default. This issue results from the use of hard-coded encryption key. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-9652.

This vulnerability allows local attackers to escalate privileges on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the file system. The issue lies in the lack of proper permissions set on the file system. An attacker can leverage this vulnerability to escalate privileges. Was ZDI-CAN-9651.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DNS responses. A crafted DNS message can trigger an overflow of a fixed-length, stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-9660.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Archer A7 Firmware Ver: 190726 AC1750 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the tdpServer service, which listens on UDP port 20002 by default. When parsing the slave_mac parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the root user. Was ZDI-CAN-9650.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of TP-LINK TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 80 by default. When parsing the Host request header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length static buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-8457.

The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to a denial of service when an unauthenticated LAN user sends a crafted HTTP header containing an unexpected Referer field.

The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to CSRF due to insufficient validation of the referer field.

The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to a denial of service when an unauthenticated LAN user sends a crafted HTTP header containing an unexpected Cookie field.

The TP-LINK EAP Controller is TP-LINK's software for remotely controlling wireless access point devices. It utilizes a Java remote method invocation (RMI) service for remote control. The RMI interface does not require any authentication before use, so it lacks user authentication for RMI service commands in EAP controller versions 2.5.3 and earlier. Remote attackers can implement deserialization attacks through the RMI protocol. Successful attacks may allow a remote attacker to remotely control the target server and execute Java functions or bytecode.